O$5.0.1 install on Windows 10

C. Fedy c_fedy at videotron.ca
Thu Jun 2 17:08:02 EDT 2016


Hi,

Yes, there is a printer installed and working. Microsoft Office is fully
functional on the problem computer, so it looks like the computer is
working, except for Omnis.

Thanks for the suggestion.

Cathy

-----Original Message-----
From: omnisdev-en [mailto:omnisdev-en-bounces at lists.omnis-dev.com] On Behalf
Of Michael Mantkowski
Sent: Thursday, June 02, 2016 3:36 PM
To: 'OmnisDev List - English'
Subject: RE: O$5.0.1 install on Windows 10

Do you have a good printer driver installed on the computer?

Many times a corrupt drive will cause Omnis to Crash on startup.

*********************************************************************
Michael Mantkowski
ClienTrax Software
1-614-875-2245
*********************************************************************



-----Original Message-----
From: omnisdev-en [mailto:omnisdev-en-bounces at lists.omnis-dev.com] On Behalf
Of C. Fedy
Sent: Wednesday, June 1, 2016 2:21 PM
To: omnisdev-en at lists.omnis-dev.com
Subject: O$5.0.1 install on Windows 10

Hello,

 

We are having difficulty with an installation of O$5.0.1 on Windows 10.
This is a new HP workstation that came pre-loaded with Windows  7 and was
immediately upgraded to Windows 10. It is an i7 with a SSD drive.  Three
such computers were bought at the same time and the 2 others are running
Omnis fine.  Even this computer ran Omnis for a short period.  Now even
after un-installing and re-installing, we are not able to successfully open
Omnis.  After entering the serial number, Omnis promptly vanishes.   

 

We have tried installing directly in a C:\Omnis\ folder as well as in the
default folder. The installation was done by a user with administrator
privileges. The exe is set run as administrator. We have tried different
compatibility settings. We have tried different copies of the setup file in
case it had become corrupted. 

 

We are trying to avoid re-installing windows due to the implications for the
client.  Also, we want to be sure that if we go that route, that it resolves
the issue, and we are not brought back to this same scenario.

 

Any thoughts or ideas would be greatly appreciated.

 

Thanks,

Cathy

~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
Catherine Fedy  <mailto:c_fedy at videotron.ca> c_fedy at videotron.ca Montreal,
Quebec Canada  <tel:450-965-8755> 450-965-8755

 

_____________________________________________________________
Manage your list subscriptions at http://lists.omnis-dev.com


_____________________________________________________________
Manage your list subscriptions at http://lists.omnis-dev.com






More information about the omnisdev-en mailing list