O6.1.2 - Unlisted SMTP Error code

[Mike Matthews]

Biull,

Was it setting the ivSSL to 2 that did the trick, or adding openSSL?

Mike





Mike Matthews,
 Managing Director, SQLWorks Software Ltd

Tel: +44 (0)1271 375999

Email: mike.matthews at sqlworks.co.uk

Web: www.sqlworks.co.uk

Use SQLWorks, forget Sage, ACT!, Opera, Access & SAP

On 22 Dec 2016, at 16:40, Bill Richards <whizzybill at gmail.com> wrote:

> Dear Werner
> 
> That does the trick, thank you ever so. It gives me a starting point on which I can build more complexity.
> 
> Happy Christmas one and all, I know that mine will be a lot happier (and busier) thanks to this!
> 
> 
> - Bill
> 
>> On 22 Dec 2016, at 11:12, Werner Dirix <werner at smartsystems.be> wrote:
>> 
>> Hello,
>> 
>> This is what I am using:
>> 
>> SMTPSend ('outlook.office365.com:587',ivSender,ivDestination,ivSubject,ivText,'','',ivSender,'$cinst.$smtpstatusproc',ivPriority,,ivSMTPUsername,ivSMTPPassword,ivSSL,ivSSLVerify) Returns status
>> 
>> Where ivSSL=2 and ivSSLVerify=0
>> Note the portnumber 587 after the SMTP-servername.
>> 
>> On Windows you also need to install OpenSSL.
>> 
>> Please note there is an error in the Omnis_Command_Reference manual in the description of the SMTPSend command.
>> 
>> In Studio version 6 the secure-parameter of the SMTPSend command is not a Boolean anymore but an integer.
>> The Whatsnew-manual describes it as follows:
>> 
>> ------------------------------------------
>> TLS support for SMTPSend and POP3
>> 
>> The SMTPSend and POP3 commands now support Transport Layer Security (TLS), a secure network protocol, including STARTTLS for the SMTPSend command, and STLS for the POP3 commands. STARTTLS establishes an SSL connection after the initial socket connection to the SMTP or POP3 server has been established. You can request this when issuing a command that connects to the server, using the optional Secure parameter, which has the possible values:
>> 0 means not secure
>> 1 means immediately secure
>> 2 means connect and then use STARTTLS/STLS to make the connection secure
>> --------------------------------------------
>> 
>> 
>> Best regards,
>> 
>> Werner
>> 
>> -----Oorspronkelijk bericht-----
>> Van: omnisdev-en [mailto:omnisdev-en-bounces at lists.omnis-dev.com] Namens Bill Richards
>> Verzonden: donderdag 22 december 2016 00:48
>> Aan: OmnisDev List - English <omnisdev-en at lists.omnis-dev.com>
>> Onderwerp: O6.1.2 - Unlisted SMTP Error code
>> 
>> Dear all
>> 
>> I am trying to do an SMTPSend via Outlook. Some of the info has been sanitised, but shouldn’t change the sense of what I am doing.
>> 
>> I accept that I am a complete child when it comes to this, but I am trying to make pretty small steps and hoped that keeping it simple would make it easier to debug, if there is such a thing with comms.
>> 
>> However, in best traditions, the error code returned ‘-1034’ is not actually listed in the error codes in the Omnis Help.
>> 
>> Anyone got some suggestions as to where I am going wrong?
>> 
>> The SMTPSend line is… 
>> 
>> ('outlook.office365.com','FV_USERNAME’,’fromme at myemail.com’,’Test Subject','Test email',,,'Bill',,,,FV_USERNAME,FV_PASSWORD,kTrue)
>> 
>> (FV_USERNAME is a properly formatted login name into my outlook account and is hence the ‘from’ email as well)
>> 
>> Many thanks
>> 
>> 
>> - Bill
>> _____________________________________________________________
>> Manage your list subscriptions at http://lists.omnis-dev.com
>> _____________________________________________________________
>> Manage your list subscriptions at http://lists.omnis-dev.com
> 
> 
> _____________________________________________________________
> Manage your list subscriptions at http://lists.omnis-dev.com